top of page
Search

Leave Your Lube Oil Cleanliness to Oil Filtration Systems

NO MANPOWER? WE GOT YOU COVERED.

LEAVE YOUR LUBE OIL CLEANLINESS TO OIL FILTRATION SYSTEMS!

Turnarounds are often the perfect time to perform much needed maintenance on the lube oil systems of critical hydraulic and rotating equipment.



While systems are scheduled to be down and offline for several days, hydraulic and lube oil reservoirs can be drained, and experienced crews can then perform confined space entry tank clean-outs.  At the same time, the oil can be thoroughly filtered to remove all particulate and moisture contamination, using High Flow Filter Skids and/or Vacuum Dehydrators. Afterwards, clean and dry oil that meets strict OEM cleanliness specifications can be pumped back into a clean reservoir.


If deemed necessary, a complete High Velocity Oil Flush or Varnish Removal Flush can be performed to remove all contamination from the hydraulic and lube oil piping as well (not just the oil and the reservoir).  This is a more involved procedure that typically requires more time and planning, but sometimes it is the only way to bring the entire system back to “like new” cleanliness standards, especially when varnish deposits have plated out on hard metal surfaces within the hydraulic or lube oil system.


FIELD SERVICES

Maintenance Managers and Reliability Engineers around the world know how important it is to keep the oil and piping in their critical rotating equipment absolutely clean and dry. This applies to pre-commissioning of new equipment as well as maintenance of existing equipment, and with this purpose in mind, Oil Filtration Systems® provides a wide range of customized high velocity oil flushing, contamination control, and oil & fuel purification services.

We Can Help:

  • Extend The Life of Rotating Equipment

  • Minimize Premature Failure of Critical Components

  • Reduce Emergency Outages and Downtime

  • Maximize Equipment Reliability

  • Reduce Overall Maintenance Costs

Oil Filtration Systems® has factory-trained and experienced personnel who will meet with your maintenance staff to conduct a pre-flush walk-down of all piping, and develop a complete and customized flush plan and procedure specific to your job.

OFS performs a variety of Field Services related to hydraulic, lubrication, and fuel oil cleanliness.  With (3) equipment depots in North America (Texas, Ohio, and Ontario, Canada) along with several crews of highly trained and experienced Field Service Technicians, we can quickly mobilize both equipment and manpower to customer jobsites around the country.


Email info@oilfiltrationsystems.com to discuss your specific application needs! 

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.

CALL US

Tel: +1 (830) 816-3332

EMAIL US

ADDRESS

135 Enterprise Parkway

Boerne, Texas 78006

About Oil Filtration Systems®

  • YouTube
  • Facebook

Oil Filtration Systems® manufactures Oil Purification Equipment designed to remove contamination (water, particulate, varnish, and/or entrained gases) from a wide variety of fluids, including Turbine Oil, Hydraulic Oil, Gear Oil, and Fuel Oil (#2 Diesel Fuel).  When used in conjunction with our high-efficiency filter elements rated Beta(c)>1000 in a variety of micron sizes, our systems will enable you to achieve optimal fluid cleanliness to meet or exceed the most stringent OEM cleanliness specifications.

We also operate the largest, newest, and best maintained Rental Fleet of highly advanced oil and fuel purification equipment in the industry. In addition, our Field Services Division has highly qualified and experienced technicians performing a variety of filtration and flushing services worldwide.  We mobilize quickly for emergency outages, scheduled outages, routine maintenance, and pre-commissioning of new equipment.

 

WE SET THE STANDARD FOR OIL PURIFICATION™

Copyright © 2022 Clark-Reliance. All Rights Reserved.

bottom of page