top of page
Search

10 GPM Varnish Removal System installed on a 6,200 Gallon Turbine Lube Oil Reservoir

We installed a 10 GPM Varnish Removal System on a 6,200 Gallon Turbine Lube Oil Reservoir at an Energy Plant in California, which was showing elevated levels of varnish contamination as measured by MPC. The initial Membrane Patch Colorimetry test showed a value of MPC 23. After six months of continual recirculation using OFS “Granular Adsorbent Media” at operating temperature, varnish levels dropped from MPC 23 to MPC 8. After continual recirculation for another 10 months, the varnish level was maintained at MPC 8. For more information on our Varnish Removal Solutions, visit oilfiltrationsystems.com. #oilgas #fuel #filtration #varnish #varnishremoval #reliability #solutions #power #energy #oil #lubeoil #turbines


28 views0 comments

Commentaires


Les commentaires ont été désactivés.
bottom of page