|
|
|
High
Flow Portable Oil Filtration Systems start off where our smaller
dolly mounted systems stop. Flow rate options start at 20 GPM and go
to 1000 GPM. They were developed to enable the end user to rapidly
remove contaminates from larger reservoirs. Our high flow systems
are portable, simple to use and can be designed and used for fluid
transfer, oil flushing, & kidney loop filtration. Our systems
can be equipped to remove particulate, water, and acidity in one
complete system.
- Flow rate
options from 20 to 1000 GPM.
- Achieve low
particle counts and low water PPM.
- Perform
on-sight oil flushing.
- Rapidly purify
large reservoirs.
- Reduce downtime
and mechanical component wear.
- Achieve high
dielectric values for dielectric oils.
|
|
Our High Flow Portable Oil Filtration
Systems are recommended for systems
that have:
- High particle
counts.
- High water
content.
- High acid numbers.
- Low resistivity.
- Low dielectric
values.
FEATURES
High efficiency particulate /
carbon removal element - Synthetic
- inert & inorganic filter media. Removes particles as small as
1 micron after one pass.
Water removal element – capable
of removing up to 2-4 gallons of water.
Optional acid removal elements:
For the removal of acids, gums, surfactants, varnishes, soaps, color
bodies, corrosive gasses, and oxidation products.
Optional flow rates and voltages: Flow rate
options from 20 - 1000 GPM. Standard voltage is 480V/3PH/60Hz.
Element plugged indication -
Differential pressure gauges and lights indicate when the elements
need to be changed. |
